Click on the image to check the artwork
Product name |
4032 Anodized Aluminum Round Bar |
Length |
0-6000mm or as requested |
Surface |
cold drawn，Mill finish, polished, etc |
Diameter |
32mm |
Tolerance |
+/- 0.03 |
Straight |
0.5mm per meter |
Standard |
EN755-2-1997;EN573-3-2003;EN755-3-1995,etc |
Product Keywords |
Anodized Aluminum Bar, 4032 Aluminum Bar |
Application |
4000 series aluminum rods are a high series of silicon content. Usually silicon content between 4.5-6.0%. Is a building materials, mechanical parts, forging materials, welding materials; low melting point, good corrosion resistance, product description: with heat, wear characteristics |
Chemical Composition | |||||||||||
Grade |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Zr |
Al |
4032 |
11.0-13.5 |
1.0 |
0.5-1.3 |
— |
0.8-1.3 |
0.1 |
0.5-1.3 |
0.25 |
— |
— |
Balance |
Mechanical Properties | |||||
Grade |
Temper |
Diameter(mm) |
Tensile Strength(Mpa) |
Yield strength(Mpa) |
Elongation(%) |
4032 |
T1 |
100.00-200.00 |
≥360 |
≥290 |
≥2.5 |
